ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: optimizer on February 25, 2012, 01:33:22 PM

Title: Suzuki Grand Vitara 2.5 ignition coil
Post by: optimizer on February 25, 2012, 01:33:22 PM

Does anyone know if the screw in the ignition coil (Boot to coil connection) should be sanded etc?
I didn't notice any look of corrosion on the first bank of cylinders I cleaned.
If the screw (or spring for that matter) is specially coated, eg. platimum, you would not want to remove the coating with abrasives - just a light cleaning.
Does anyone know the details?


p0300 p0301 p0302 p0303 p0304 p0305 p0306

Title: Re: Suzuki Grand Vitara 2.5 ignition coil
Post by: optimizer on February 25, 2012, 01:35:23 PM

also, the screw didn't want to loosen.
Can or should it be removed, and what happens when it is removed?