ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: tyborbogdan on February 26, 2012, 05:56:55 PM

Title: where is my o2 sensor..
Post by: tyborbogdan on February 26, 2012, 05:56:55 PM

I'm mechanically illiterate but shouldn't the o2 sensor be where the header is? It looks like there's a place where it should be but there's nothing there. I don't see any wire for it or place. Is it under the heat shield?

Title: Re: where is my o2 sensor..
Post by: tuxblacray on February 26, 2012, 06:41:59 PM

It is supposed to be in the spot you indicated. Looks like Bubba done been there....  :(

Title: Re: where is my o2 sensor..
Post by: fuzzy1 on February 26, 2012, 09:17:21 PM

X2, It's spot has been plugged with... ummm, something... But, since I can tell it's a Sammy by the jack on the fender... has your carb been replaced with a Weber or the like? If so, the o2 sensor is no longer needed.

Title: Re: where is my o2 sensor..
Post by: tyborbogdan on February 26, 2012, 09:48:38 PM

It the stock carb, but its not the hitachi, its the aisin carb that was sold in certain markets i'm assuming, and its an 87 samurai, forgot to add that. so I guess theres no o2 censor  :-\

Title: Re: where is my o2 sensor..
Post by: Rhinoman on February 27, 2012, 02:14:46 PM

Quote from: tyborbogdan on February 26, 2012, 09:48:38 PM

It the stock carb, but its not the hitachi, its the aisin carb that was sold in certain markets i'm assuming, and its an 87 samurai, forgot to add that. so I guess theres no o2 censor  :-\

Thats correct, mine is like that, the boss on the manifold is cast in but not machined, I also had the Aisin carb.

Title: Re: where is my o2 sensor..
Post by: tuxblacray on February 27, 2012, 03:13:17 PM

Thanks Rhinoman!

I'm no new kid to motors or 4wds...

I am new to Zuks though and learnig.....

Stuff like that is great info!!!