ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: zav6a on March 16, 2012, 06:01:52 PM

Title: Carb on 1.6 8v efi manifold
Post by: zav6a on March 16, 2012, 06:01:52 PM

Is there a carb that bolts up and runs well on the efi manifold?

And I may put a magneto on it and go total Luddite.

Title: Re: Carb on 1.6 8v efi manifold
Post by: Drone637 on March 19, 2012, 10:31:16 AM

Which motor is this for?

Title: Re: Carb on 1.6 8v efi manifold
Post by: zav6a on March 21, 2012, 08:10:50 AM

It is a 90 tracker. 1.6 8v

Title: Re: Carb on 1.6 8v efi manifold
Post by: mike5721947 on March 21, 2012, 08:41:40 AM

Intake off a 1.3 carbed fits. dont know of any carb that will bolt to the efi intake

Title: Re: Carb on 1.6 8v efi manifold
Post by: zav6a on March 23, 2012, 08:57:12 PM

Thanks.  I could not find anything either.  I have already done port matching and hoped to use the 1.6 mani instead of going back to the 1.3 mani.  The 1.6 runners are noticeably larger in diameter.

I will probably just grunt through the wiring job and use the efi.

Title: Re: Carb on 1.6 8v efi manifold
Post by: KJMac on March 28, 2012, 11:21:49 PM

I think you won't regret going EFI!

Kj