ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: rittwage on April 06, 2012, 11:59:32 AM

Title: 91 Sammy Distributor wiring colors?
Post by: rittwage on April 06, 2012, 11:59:32 AM

I have a 91 Samurai - A thief stole the ECM and distributor (that I know of so far) so I am trying to get it back together.

I have a new distriibutor installed, but the connector back to the ECM was cut out of the main wiring on the firewall.  Thanks alot, theif.

I found the 3 wires in the harness (BLK/GRN, BLU/RED, and BLU/BLK) but where do they go on the distributor, which has RED, BLK/WHT, and BRN?

Can someone take a quick look for me?  I've searched the Haynes and Ack's FAQ but it doesn't mention the wire color on the distributor itself....

Title: Re: 91 Sammy Distributor wiring colors?
Post by: kartracer162 on April 07, 2012, 06:49:33 AM

blue red- red
black green-brown
black blue-black white

Title: Re: 91 Sammy Distributor wiring colors?
Post by: rittwage on April 07, 2012, 08:33:27 PM

Thanks very much.  I get no fire, though, so I suspect my ECM needs a rebuild.  I opened it up and it's not corroded through, but there is some green in there. 

I had the original ECM rebuilt probably 10 years ago by a forum member here.  Who still does test/rebuilds?

Title: Re: 91 Sammy Distributor wiring colors?
Post by: kartracer162 on April 08, 2012, 06:41:50 AM

David Ruberg #507 429 4489 he had mine fix in under a week and works great

Title: Re: 91 Sammy Distributor wiring colors?
Post by: rittwage on April 29, 2012, 03:56:43 PM

OK, I've got my ECM reworked and everything back together, but I still get no fire.  Diagnostic code flashes 41, no ignition signal.