ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: dirtzero on April 12, 2012, 04:32:59 PM

Title: no power from the silonod on a 1.3 sammy motor
Post by: dirtzero on April 12, 2012, 04:32:59 PM
Cant seem to figure out why this sammy dont have any power. I am no getting any power from the siilonod at all It is a brand new starter and silonod. I am testing it on the wire pigtail from the silonod.

thanks
Title: Re: no power from the silonod on a 1.3 sammy motor
Post by: Drone637 on April 18, 2012, 09:22:08 AM
Is the issue that the rig is not turning over when you hit the starter?
Title: Re: no power from the silonod on a 1.3 sammy motor
Post by: ack on April 18, 2012, 06:21:01 PM
Also, you have to depress the clutch pedal to connect the ignition switch to the starter soleniod circuit.

Pesky safety features....

You can bypass the switch on the clutch pedal to remove this feature - although it is pretty hand in ordinary operation.