ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: Khodabear on June 02, 2012, 09:32:11 AM
-
4 x 4 - Automatic - 16 Valve 1.6 - Blown head gasket - Cracked Cylinder
The title was screwed up by the previous owner - not signed properly - now she's nowhere to be found so it's parts.
Sheet metal is all good.
Let me know if there's anything of interest.
(http://i488.photobucket.com/albums/rr246/Peter_Crowl/100_0819.jpg)
(http://i488.photobucket.com/albums/rr246/Peter_Crowl/100_0823.jpg)
(http://i488.photobucket.com/albums/rr246/Peter_Crowl/100_0826.jpg)
(http://i488.photobucket.com/albums/rr246/Peter_Crowl/Copyof100_0824.jpg)
-
Interior door handles and window regulators(not the window crank) shipped to Oregon.
-
All 4?
-
drivers side window regulator, both drivers side handles.
-
Master brake cyl and the rubber intake hose that clamps between the air cleaner and the aluminum intake tube. shipping to 90731 zip.
Ed
-
did it have AC ? doesn't look like it from the pic...
-
No A/C on this one :-(
As for the other inquiries -
It's in my storage yard which is about 30 minutes away. I'll stop there tomorrow and check the window regulator and handles to be sure they're good. I'll also check the rubber intake hose for quality.
Replies will come via PM.
Since I'm going, anybody else have a request?
Thanks !!
Peter
-
I need the:
mass air flow sensor part of the intake. (left mine in the trunk & it got broke)
steering shaft between the firewall & steering box
possibly the speedo cluster as well
-
I need the:
mass air flow sensor part of the intake. (left mine in the trunk & it got broke)
steering shaft between the firewall & steering box
possibly the speedo cluster as well
All of this will be available. I'll be bringing it in for dismantling next week. Needless to say I'll have to tear it down some to get to the shaft. If the shaft from a 91 Tracker would work for you that'd be available this week.
I have an instrument cluster available now from a 91 2 door Tracker. $50 plus postage
-
you have pm....
-
Bump
-
Lower timing pulley, key, and bolt?
-
price on the 1.6 complete?
-
cup holder and hardware?
-
Grill?
-
All inquiries are being replied to via PM
Thanks!
-
What about the head with cam?
-
does this have 4.30 thirds? If so I'm interested in the front axle third.
-
PM's sent
Thanks!