ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: ZukRebuild on June 13, 2012, 10:57:59 AM

Title: I need a stock ring and pinion.
Post by: ZukRebuild on June 13, 2012, 10:57:59 AM

My ring and pinion is destroyed i just want to replace let me know if you have a stock rear ring and pinion and how much your selling it for.

Title: Re: I need a stock ring and pinion.
Post by: kreator on June 13, 2012, 11:37:30 AM

WHAT WAS THE RATIO ?  ???

Title: Re: I need a stock ring and pinion.
Post by: ZukRebuild on June 13, 2012, 11:50:35 AM

3.73 do you have one?

Title: Re: I need a stock ring and pinion.
Post by: nprecon on June 16, 2012, 10:14:31 AM

I have a complete stock rear carrier assembly from a pre-88.5 Sammy (small flange).   I don't think I'm going to be using it after all. It is already set-up so you wouldn't have to assemble unless you were installing a locker in it.  Would you be interested in it for $50 plus shipping?

Title: Re: I need a stock ring and pinion.
Post by: ZukRebuild on June 21, 2012, 07:03:58 PM

Is it still available

Title: Re: I need a stock ring and pinion.
Post by: nprecon on June 22, 2012, 10:28:51 AM

Yes.  Check your PMs.