ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: ebewley on July 06, 2012, 07:10:57 AM

Title: Samurai Fitted Dana 44 Axles w/goodies - Oregon
Post by: ebewley on July 06, 2012, 07:10:57 AM
I've got a new plan for my first-love Samurai which involves selling off the Dana 44 axles that are under it and the associated bits that go along with that. At this time, everything is still underneath the Samurai but it'd only take an afternoon to unbolt and put on some pallets, your trailer, or your pickup truck. So, here's what I've got:

Front & Rear Dana 44 axles
5.89:1 R&P
Detroit Lockers
-Rear axle is a 78/79 Wagoneer Quadratrac so the diff is offset, drum brakes
-Front axle is a full size Chevy with the long side cut down to match width and to use stock spring mounting location
-Dutchman axles in front, disc brakes
Tom Wood's Drive Shafts
High angle CV shafts for front and rear w/bolt flange at the top to connect to your Samurai t-case (early model)
Sky's Offroad Design High Steer http://zukiworld.com/month_020104/feature_skysteer.htm (http://zukiworld.com/month_020104/feature_skysteer.htm)
Steering included up to but not including the pitman arm.
Sky's Offroad Design Traction Bar http://zukiworld.com/month_010101/feature_skymfg_tractionbar.htm (http://zukiworld.com/month_010101/feature_skymfg_tractionbar.htm)
Black Diamond Shocks eh? they were good at the time
Shocks and well everything mounts to stock locations on the Samurai frame.
35x15.5x15 TSL/SX Tires on Mickey Thompson "like" 10 inch rims
Tires worn; wheels fair
Extended brake lines, bump stop extensions, misc bits

Basically, I'm selling a package where you could roll these axles under a stock Samurai and bolt everything up with little or no modifications and be ready to tackle just about anything.

Located in Oregon close to Portland, Will ship, buyer pays shipping, $2900 Please send a PM if you're interested.

Thank you, Eric


Title: Re: Samurai Fitted Dana 44 Axles w/goodies - Oregon
Post by: ebewley on July 29, 2012, 12:11:27 PM
Bump.
Title: Re: Samurai Fitted Dana 44 Axles w/goodies - Oregon
Post by: ebewley on September 25, 2012, 07:13:14 PM
bump... Offers? Please PM...
Title: Re: Samurai Fitted Dana 44 Axles w/goodies - Oregon
Post by: willgivens18 on November 12, 2012, 03:04:38 PM
Will you separate or is all of it going together. All I need are axles, brakes and stuff that goes with axles.
Title: Re: Samurai Fitted Dana 44 Axles w/goodies - Oregon
Post by: ebewley on November 13, 2012, 06:33:47 PM
Will you separate or is all of it going together. All I need are axles, brakes and stuff that goes with axles.

I think that's what I'm offering unless I'm not understanding you. Please PM me your phone number and we can talk.

-Eric