ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: Khodabear on July 08, 2012, 08:49:41 AM

Title: Parting Several TracKicks
Post by: Khodabear on July 08, 2012, 08:49:41 AM
This consolidates two previous posts and adds 2 other vehicles to the list.

These are mostly rust free Colorado trucks - located in Denver.

1991 2 door: Most everything available except the motor and front clip. The tub and chassis have been scrapped.
5 speed with transfer case $195, ECM $75, nice set of factory alloy wheels $95, doors, glass, fuel system, top hardware, interior parts and much more.

1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

1994 2 door: 1.6L 8 valve. Hear it run! $595 complete plus any and all wiring you need , 3 speed automatic transmission $150, 4.30 thirds (They haven't been pulled so I'm going off specs)$295 for for both. Some body parts.

1997 Sport Sidekick 4 door 1.8 L. Good motor $695, all body and interior parts, ECM $100, AC parts, Power Steering. This one suffered transmission failure - other than that it's straight and complete.

Offers considered - the more you buy the better the deal :-)
303 91 eight 944 five
Email Finboats|removethispart||removethispart||removethispart|@Gmail.Com
Title: Re: Parting Several TracKicks
Post by: krittergitter on July 10, 2012, 06:37:06 PM
Just a little help here, your 96 should have 16 valve motor.
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 10, 2012, 06:58:51 PM
You're right! The 8 valve is a 94.
I also have a '96 two door that has one weak cylinder. I'm not yet certain which direction to take with it as it's actually a fairly nice little rig. So I've not committed to parting it - but it's on my mind.
Thanks!
Peter
Title: Re: Parting Several TracKicks
Post by: zuki709 on July 11, 2012, 05:20:27 AM
how much would you want for the ring and pinion front and rear out of the 97 sport?
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 11, 2012, 05:49:11 PM
how much would you want for the ring and pinion front and rear out of the 97 sport?

This is difficult. Needless to say selling these would take it off its feet and I'm not a pro yard with a forklift. So it would have to be the last items I'd sell off of  it. Since this is the functional equivalent of selling the whole thirds I'd have to say $345 plus postage for both.
Title: Re: Parting Several TracKicks
Post by: airdreams1 on July 11, 2012, 09:21:07 PM

 "3 speed automatic transmission $150"
any idea on shipping to star ID 83669   
Title: Re: Parting Several TracKicks
Post by: oneal on July 13, 2012, 02:19:07 PM
 Do you have the retractable seatbelt for the drivers side rear(just need the belt/retracter not the whole assembly.Also need a driver door cable that operates the window(manual)
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 13, 2012, 05:30:10 PM

 "3 speed automatic transmission $150"
any idea on shipping to star ID 83669   

I replied before the outage but you might not have received it.
I have no idea - it would seem that a common carrier would have to be used.
If you care to pursue that please do so knowing that I'm happy to facilitate by palletizing and dropping it off at a shippers local dock.
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 13, 2012, 05:31:57 PM
Do you have the retractable seatbelt for the drivers side rear(just need the belt/retracter not the whole assembly.Also need a driver door cable that operates the window(manual)

The seat belt part is available - the drivers side window...I'll have to open the door up and see how it is. The window is a bit sketchy but it does work.
Title: Re: Parting Several TracKicks
Post by: tuxblacray on July 15, 2012, 03:24:16 PM
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.
Title: Re: Parting Several TracKicks
Post by: Skyhiranger on July 15, 2012, 04:55:53 PM


1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

Just an FYI....
4 speed autos are found in 4 doors.
3 speed autos are found in 2 doors.
So if that 94 is a 4 door, like you list, then it will have a 4 speed, not a 3 speed.
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 15, 2012, 05:29:08 PM


1994 Sidekick 4 Door
: 16 valve, 3 speed Automatic. No air :-(
For those who've asked about the head - it's coming off in the next day or two. Vehicle is complete with a very straight rust free body. If the title wasn't screwed up this would be a candidate for rehabilitation.

Just an FYI....
4 speed autos are found in 4 doors.
3 speed autos are found in 2 doors.
So if that 94 is a 4 door, like you list, then it will have a 4 speed, not a 3 speed.


Shows you what I know  ::)
Thanks for the correction!!!

Title: Re: Parting Several TracKicks
Post by: Khodabear on July 15, 2012, 05:38:41 PM
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.

$20 plus postage I'd like to think they'd fit in a medium FRB for $11
Photo attached to be sure this is what you mean
Title: Re: Parting Several TracKicks
Post by: tuxblacray on July 16, 2012, 11:44:10 AM
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.

$20 plus postage I'd like to think they'd fit in a medium FRB for $11
Photo attached to be sure this is what you mean

Yep that is them. I am gonna try to switch mine from side to side which will reverse the button location 1st. If that doesn't work out I will be in contact.

                                                                    Thanks, Tux...
Title: Re: Parting Several TracKicks
Post by: airdreams1 on July 20, 2012, 11:42:56 AM
ou have pm on the 3 speed trans....

i know ill need the trans, shifter, linkage, torque converter & ?   
(if anyone kn0ows what else is needed to put it in a sammy please pm me.)
Title: Re: Parting Several TracKicks
Post by: tuxblacray on July 21, 2012, 06:13:35 AM
What would you want for the driver and passenger seat belt floor to female clip button portions? (I don't need the upper male belt or re-tractors.

I put a Tuffy locking console in my Sammi and the side mount belt clips are just plain awkward.

Shipping could be both items in a flat rate USPS box. Area code is Indiana 47240.

$20 plus postage I'd like to think they'd fit in a medium FRB for $11
Photo attached to be sure this is what you mean

Khoda,

Just to let you know I reversed the lower unit button direction so they faces inward versus outward and they work fine this way. (Much less awkward)

If someone else needs the belts let them go!                                                Thanks! Tux...

Yep that is them. I am gonna try to switch mine from side to side which will reverse the button location 1st. If that doesn't work out I will be in contact.

                                                                    Thanks, Tux...
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 21, 2012, 06:41:21 AM
Outstanding - and a good tip for others!
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 25, 2012, 06:50:35 AM
ou have pm on the 3 speed trans....

i know ill need the trans, shifter, linkage, torque converter & ?   
(if anyone kn0ows what else is needed to put it in a sammy please pm me.)

PM Sent I need to hear from you regarding the parts with shipping.
Thanks!
Peter
Title: Re: Parting Several TracKicks
Post by: Khodabear on July 31, 2012, 05:35:29 PM
Just added a 1992 2 door Sidekick. Looks to have a very good 8 valve motor!
Title: Re: Parting Several TracKicks
Post by: rgregory on August 02, 2012, 02:03:37 PM
How much for the 3spd trans shipped to 78010
Title: Re: Parting Several TracKicks
Post by: Khodabear on August 02, 2012, 04:18:51 PM
Hi,
Thanks for the inquiry.
Before I go to all the effort of finding a carrier and so forth - what end out price do you have in mind?
I ask because I've done this a number of times to other areas of the country only to find out that the interested party had a price in mind that wasn't going to work. So now I ask first :-)

The transmission is $225
Title: Re: Parting Several TracKicks
Post by: justzukies on August 10, 2012, 01:12:22 AM
am interested in some manual locking hubs?  If you have can you give me a price.  c:  970.250.1320. 
Title: Re: Parting Several TracKicks
Post by: Khodabear on August 10, 2012, 06:11:54 AM
Sorry but at this time I only have Automatics :-(
Title: Re: Parting Several TracKicks
Post by: Khodabear on August 29, 2012, 07:28:54 AM
UPDATE:
I just brought in a very nice 1994 Tracker, 8 Valve Automatic

Offering some Get Ready for Fall Specials  ::):
Good running 8 valve motor -  complete - with wiring harness - $445
4:62 Thirds $245  / pair
5:12 Front Third $149
4 speed Automatic Transmission $195
5 Speed Manual Transmission $195
Transfer Case - $175
OEM Air Conditioning set-up   -complete pull out from 1994 2 door - $495
Rust Free Doors - Complete - Interior panel condition varies - 2 and 4 door - $100 each
Rust Free 4 door tailgate $150
Rust Free Bumper Inner Members - $95 each I have at this time a 2 door rear as well as 4 door front and rear
4 door trailer hitch - DrawTite - $95

Prices do not include shipping

Lots more - please inquire - Offers always considered

Peter
303 Nine18 Nine445
Title: Re: Parting Several TracKicks
Post by: 800wildcat on September 01, 2012, 10:42:32 PM
How much for the speedo, tach, temp and fuel gauge assembly?  Don't really need the speedo, but do need the other three.  Just assuming it would be easier to pull and ship the whole unit.  Any guesstimate on shipping to 54971?  It's for a '95 so I think I'd need one from the '97; I know at some point the hook ups are different on the older units.  Not sure when the change happened so not sure if the '94's would work. Thanks.
Title: Re: Parting Several TracKicks
Post by: Khodabear on September 02, 2012, 06:17:17 AM
$65 including postage
Title: Re: Parting Several TracKicks
Post by: bentparts on September 03, 2012, 05:17:15 AM
If you weren't so far away I'd jump all over that 4 speed trans.  :(
Title: Re: Parting Several TracKicks
Post by: jwarnick11 on September 04, 2012, 04:58:54 PM
Taillight sockets? kind of a pety thing but damn are they hard to find in decent shape in my area
Title: Re: Parting Several TracKicks
Post by: Khodabear on September 04, 2012, 05:19:45 PM
Got em!
Full set - both sides - $35 postage included to the lower 48
Title: Re: Parting Several TracKicks
Post by: jwarnick11 on September 04, 2012, 05:47:18 PM
ill take them!
Title: Re: Parting Several TracKicks
Post by: jwarnick11 on September 04, 2012, 06:25:15 PM
Khodabear not sure if the messages are working but i sent the paypal
 four23-five25-six156 if u got questions.
Title: Re: Parting Several TracKicks
Post by: Khodabear on September 04, 2012, 06:29:41 PM
Haven't seen it come through just yet - I'll advise when I do.
Title: Re: Parting Several TracKicks
Post by: Khodabear on September 05, 2012, 07:07:35 AM
Something is amiss - still no PP transfer on my end.
Title: This Just In!!
Post by: Khodabear on September 07, 2012, 06:14:28 PM
Just brought in a 1993 Sidekick 4 door JLX
16 valve, 5 speed, power windows and mirrors, hard case spare tire cover
AC, lots of good parts here!
If you're looking for a virtually rust free rolling body/chassis as a base for your project this could be it!
Title: Re: Parting Several TracKicks
Post by: 89kicker on October 14, 2012, 07:02:27 PM
do you have combanation switches? ie turn signals/ wiper motor switches from 96/98 track or sidekick? passenger side window regulator from earlier models. also the throttle kickdown cable and the part the cable hooks to on the intake from a 96-98 auto 3 speed.