ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: GO_OUTSIDE! on August 08, 2012, 06:22:35 AM

Title: Where do these vacuum lines go on my Samurai?
Post by: GO_OUTSIDE! on August 08, 2012, 06:22:35 AM

I have a vacuum line and a vacuum port that are open and mysterious.

(http://i1058.photobucket.com/albums/t407/ekull3/Samurai%20build/preview_image_0_78890152x.jpg)



The port is hard to see in these pictures, but it is on the manifold about 1/4 of the way up and just left of center in the  photo, looking straight up at you.

(http://i1058.photobucket.com/albums/t407/ekull3/Samurai%20build/preview_image_0_64978972x.jpg)


Any clues? The map under the hood isnt helping me any.

Title: Re: Where do these vacuum lines go on my Samurai?
Post by: WesP on August 08, 2012, 03:18:50 PM

Look at this site:
http://www.acksfaq.com/Samvacuumlines.htm (http://www.acksfaq.com/Samvacuumlines.htm)

Title: Re: Where do these vacuum lines go on my Samurai?
Post by: GO_OUTSIDE! on August 09, 2012, 05:19:53 AM

Very helpful thanks!

Title: Re: Where do these vacuum lines go on my Samurai?
Post by: ranger88den on August 09, 2012, 02:45:31 PM

Not familiar with Samurais, and just a guess, but it looks like it could go to the map sensor.  Do you have one on the firewall?