ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: oak_raid on September 05, 2012, 05:34:10 AM
-
Been thinking for some time of replacing the sagging springs in my 87 Samurai. Found a deal on a set of 1.5" lift calmini springs, including 15" braided brake lines, new front shocks, rear shackles and new bump stops for $250.
Having never done any suspension work this dont seem like a job I cant do myself. My main question is other than the obvious (rear shocks, front shackles and mounting hardware) is there anything else I will need to complete this project? Any tips that will help make the job easier from those who have done it before?
-
Lots of PB Blaster to spray on all of the bolts. If it hasn't been worked on in a while you might want to spray them down the night before as well.