ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: MAYHEM760 on September 06, 2012, 12:23:54 PM

Title: 1 in coil spacer for the front
Post by: MAYHEM760 on September 06, 2012, 12:23:54 PM: 91 Track 4x4 and it's approx 1 in shorter in the front compated to the rear. Will a 1 inch lift spacer even it out?
If so, someone please post a pic

Thanks,
Title: Re: 1 in coil spacer for the front
Post by: Drone637 on September 06, 2012, 03:03:14 PM: A 1/2" space will do it or if it is a 2-door pick up some springs from a 4-door Tracker.
Title: Re: 1 in coil spacer for the front
Post by: fordem on September 07, 2012, 07:52:29 AM: Wouldn't a better approach be to determine WHY the front is low as a first step?

There is a possibility of weak and/or sagging springs at the front and even a lifted rear. I ask this question as much for my own "education" as to suggest a better approach - the front of one of my small 4WDs (non Suzuki) appears to have a spring problem, and I have been looking at my options with a focus on locating replacement springs.
Title: Re: 1 in coil spacer for the front
Post by: Drone637 on September 07, 2012, 11:28:45 AM: Quote from: fordem on September 07, 2012, 07:52:29 AM
Wouldn't a better approach be to determine WHY the front is low as a first step?

Stock the Trackers have a rake to the front end.
Title: Re: 1 in coil spacer for the front
Post by: jeff1997 on September 08, 2012, 02:50:58 PM: I can supply whatever thickness spacers you need. I actually have some short ones laying around that I will send for CHEAP.