ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: nimrodsman on September 16, 2012, 08:33:36 PM

Title: Weber 32/36 DGEV
Post by: nimrodsman on September 16, 2012, 08:33:36 PM

I have an 87 samuri and am going to put this weber on this weekend. I have a set of adaptor plates for and issuzu came off a Chev LUV. Will it bolt up or will I need any thing else? Plan to put it on this weekend and do not want to start with out all the parts I need. Thanks for any advice you can give

Title: Re: Weber 32/36 DGEV
Post by: nimrodsman on October 22, 2012, 11:07:51 PM

All in and running--do have a slight vacuum leak under the mounting plate. Took back off and cut new gaskets and now running fair. Still have high idel might still be a slight leak. Does give more bang for the buck than the stock. Thanks for info from all who gave me help

Title: Re: Weber 32/36 DGEV
Post by: zuki1018 on October 24, 2012, 09:28:42 AM

Quote from: nimrodsman on October 22, 2012, 11:07:51 PM

All in and running--do have a slight vacuum leak under the mounting plate. Took back off and cut new gaskets and now running fair. Still have high idel might still be a slight leak. Does give more bang for the buck than the stock. Thanks for info from all who gave me help

Congrats!

Next steep hill you climb when the float chokes out your fuel supply, flip the carb 180 so it least it does it down hill!