ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: Jakezuki on September 25, 2012, 11:24:00 AM
-
hopeing i can get an answer on welding perchs onto axle do i have to twist the axle at all or straight on top and any other tips would help thanks
-
New should be parallel to old.
Then grind the old ones off so it looks nice/won't hang up (optional)
-
Or just get some of the self-aligning pads that Sky Manufacturing makes and take the guess work out of it:
http://www.lowrangeoffroad.com/index.php/suzuki/samurai/suspension-parts/sky-hd-sky-self-aligning-spring-over-axle-pads.html (http://www.lowrangeoffroad.com/index.php/suzuki/samurai/suspension-parts/sky-hd-sky-self-aligning-spring-over-axle-pads.html)
-
thanks is there anything elsee i need to do this other than perchs and new bushings
-
YES!!You will need to square away your steering,drop pittman OR drop drag link should do well.Oh and longer shocks too! ;)
-
You can cheat on the shocks and just flip your spring hangers around. All though at that point you should probably extend your bump stops a bit longer.
I'm a big fan of the Sky Stage 2 lift. It gives you everything you need for a SPOA. Longer brake lines, pads, drive-line spacers, and an Over The Top steering setup.
http://www.sky-manufacturing.com/new/detaproduct.php?id=92 (http://www.sky-manufacturing.com/new/detaproduct.php?id=92)
-
True about the "cheating"....!!