ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: rockybaroofy on October 07, 2012, 02:27:22 PM

Title: tracker third in a sami front ?
Post by: rockybaroofy on October 07, 2012, 02:27:22 PM
so , I was looking thru the classifieds and I saw a picture of a sami front end with what looks like a tracker rear third in the place of the stocker , it even  had the upper triangulation bar mount for the tracker . I was told that a tracker front third would work in a sami front , but not a rear tracker third , so why is this not supposed to work and how did this person do it ? I am thinking about this swap will I'm doing my SAS , the iron third would be much stronger and I already have both front and rear spares .I believe the person that posted the ad was airmanwilliams and it was advertised as a front end for a tracker sas .
Title: Re: tracker third in a sami front ?
Post by: Skyhiranger on October 07, 2012, 05:12:46 PM
That is not a stock samurai axle.  It has a trackick rear center section in it.

The trackick rear third is physically too large to fit in a stock samurai axle housing.
Title: Re: tracker third in a sami front ?
Post by: LowRangeWilliam on October 10, 2012, 10:27:09 PM
you could use the rear third member out of a sidekick/Tracker  in the Samurai with a hibrid rear housing
Contact Low Range off road
Title: Re: tracker third in a sami front ?
Post by: Skyhiranger on October 11, 2012, 05:41:54 AM
you could use the rear third member out of a sidekick/Tracker  in the Samurai with a hibrid rear housing
Contact Low Range off road

Sounds like he is working on doing a front SAS on a trackick.  So how is a hybrid rear axle going to help him?