ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: somersetzuk on November 04, 2012, 01:11:21 PM

Title: Weber carbourator problems
Post by: somersetzuk on November 04, 2012, 01:11:21 PM

Cant seem to adjust it just right any tips or secrets to these things. my problem is hit a bump an it will kill out i can pull up my drive way an it will kill out. any help will help me out thanks.

Title: Re: Weber carbourator problems
Post by: rascott on November 04, 2012, 09:45:18 PM

perhaps the float is set too high.
uphill may pour gas into venturi, if this were the case. mabe bumps too.(?)
have you looked inside it before?
32/36 weber?

Title: Re: Weber carbourator problems
Post by: Capt on November 05, 2012, 09:02:28 AM

Is It Really a WEBER?

Stock Hitatshi carbs will do this when the Metering & Shut off solenoid is going south.
It is a NON-REPLACEABLE part. Only option is to get a different carb.

Haven't heard of a Weber having this problem.

Title: Re: Weber carbourator problems
Post by: somersetzuk on November 06, 2012, 01:24:12 PM

IT IS A 32/36 weber SO I DONT KNOW I HAVE HEARD I NEED TO BEND MY FLOATS

Title: Re: Weber carbourator problems
Post by: rascott on November 06, 2012, 07:29:59 PM

i still think it would be worth opening it up and checking the float set.
you mentioned it cuts out going uphill?