ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Classified Ads => Topic started by: tuxblacray on November 15, 2012, 03:35:16 PM

Title: Tail Light Guards / Targa Bar Sides / Drivers Door / Rims
Post by: tuxblacray on November 15, 2012, 03:35:16 PM

OEM set of Suzuki Samurai Tail Light Guards that I would like to sell for $25.00.
                                                                       
(http://farm9.staticflickr.com/8205/8194696738_059e52e6c6.jpg)

Targa bar sides for $30.00  Driver side slighted concave.

(http://farm9.staticflickr.com/8203/8193596995_afb7c79612.jpg)

Green Door Shell Skin - no hardware $30.00

(http://farm9.staticflickr.com/8485/8194676536_2798d5cbec.jpg)

2 Hurricane Aluminum Rims 15 X 7  Lug Pattern 5 - 5.5 Center Bore 4.25 $50.00

(http://farm9.staticflickr.com/8197/8194671404_3ecd445bed.jpg)

All Items can be shipped to the lower 48 states if you pay the shipping charges. Pick up available 1 hr East of Indianapolis, Indiana.

Title: Re: Tail Light Guards / Targa Bar Sides / Drivers Door / Rims
Post by: bentparts on November 18, 2012, 04:09:51 AM

I might be interested in those tail light guards, how do they mount?

Title: Re: Tail Light Guards / Targa Bar Sides / Drivers Door / Rims
Post by: tuxblacray on November 18, 2012, 06:22:32 AM

1 screw on each of the outside short run brackets. I don't have the screws and I am not sure if they screw directly into existing Samurai light housing holes.

If you can tell me center to center  for the tail light screw on an OEM bumper I could check.

I bought these along with some other items as a lot. I used the marker light guards from 2 sets for my rear bumper because my aftermarket bumper lights are shorter in length.

If you want additional photos I can do that without any problem.

Title: Re: Tail Light Guards / Targa Bar Sides / Drivers Door / Rims
Post by: bentparts on November 18, 2012, 06:24:10 PM

Thanks buddy, I just realized there for a Sammy, I got a Tracker. Opps  :-[