ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Fredo on March 23, 2004, 11:18:59 AM
-
I found this ont the Apio site but...F*CK i don't understand anything in japanese!!!! ???
http://www.carmag.co.jp/apio/02PARTS/022ESCUD0/022TE0001/ESEX005.html
Fredo
-
lol i actually contacted them in japan to inquire about these parts. figuring in duty taxes and shipping it would cost almost $500 cdn. nah I'd rather try making my own somehow. neat part i wish someone here would make a set for sale.
-
I found this ont the Apio site but...F*CK i don't understand anything in japanese!!!! ???
[url]http://www.carmag.co.jp/apio/02PARTS/022ESCUD0/022TE0001/ESEX005.html[/url]
Fredo
Try this http://www.mezzofanti.org/translation/
ESCUDO pyro upper mount
Item turn: 1221-1
Price: (Left and right set) \30,000
Adaptation model: For TA/TD01 11
(End in the escudo of number of 2 use failure at the telephone please be sure to verify TA02 and the like) before the purchasing. Up to 0467-78-1182.
At the time of the lift rise by the coil spring it occurs, over camber of the front wheel (the letter of opposite ハ) state is revised. (Correction value 1 MARU 15") because of this, decreases understeer tendency with camber angle, travelling stability improves. It corresponds to the car which approximately 50mm it was lifted was raised.
Material: Strengthening aluminum/steel/stainless steel
The commodity is purchased
Copyright (C) 1997-2002 By APIO. (JAPAN) All rights reserved.
-
What do you wonna know? That factory is right down the street from me. They have some neat stuff, but outrageous prices >:(
-
Once the text is translated and then deciphered a bit more it is actually quite interesting, particularly the bit about understeer, I always assumed that was down to the spring rating (possibly contributes). If I'm guessing correctly their design allows for correction between 1 and 15 degees. This is considerably more than I've seen quoted for the eccentric bolt approach. I like the look of it but they've only done half a job they should have incorporated it into a 2" spacer
-
$500 cdn!!!!!!!!!!!!!!!!!!!!!!!!!!!!! :o
but outrageous prices
Fredo
-
Hey Somer!
Could you do me a favor and find out the current prices on part #'s
3029-11, 3029-12, 3029-13 and 3029-14
And also if you can find out shipping to the USA zip code 26170
Thanks, Mike
-
Hey Somer!
Could you do me a favor and find out the current prices on part #'s
      3029-11, 3029-12, 3029-13 and 3029-14
And also if you can find out shipping to the USA zip code 26170
          Thanks, Mike
I just checked their web site and for those parts they are about
3029-11=$310
3029-12=$720
3029-13=$660
3029-14=$750
Wow!! thats a lost of $$, especially since the dollar to yen rate really sucks right now. I couldn't find an email address on their site, but I can call then later if you still want to know if they can ship it.
-
Thanks "blacknight", cool translation link.
-
I just checked their web site and for those parts they are about
3029-11=$310
3029-12=$720
3029-13=$660
3029-14=$750
Wow!! thats a lost of $$, especially since the dollar to yen rate  really sucks right now.  I couldn't find an email address on their site, but I can call then later if you still want to know if they can ship it.
If you wouldn't mind finding the shipping cost that would be great. I would like to see how much I might have to pay if I decide to get it.
Thanks, Mike