ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: timpvjr on January 04, 2016, 03:04:07 PM
-
Hello!
I'm trying to install a Spartan locker on my front differential. I have removed the axles, and all the bolts, but I cant seem to get it apart. Any ideas?
Thanks!
-
What are you trying to remove - the "cover" or the third member - and what vehicle are we discussing?
-
Its an 86 Samurai. The front of the dif that houses the pinion.
-
Presumably you already have the drive shaft removed, put a jack under the nose and jack it up some, it's most likely the sealant that's holding it.
-
That's a good idea. Thanks!