ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: Tracker03 on January 08, 2016, 03:53:28 PM

Title: 2003 Chevrolet Tracker 4x4 SAS
Post by: Tracker03 on January 08, 2016, 03:53:28 PM

I'm new to this site, so hopefully I'm posting in the right spot. Recently I purchased a 2003 Chevrolet Tracker lt 4 door ,4x4 with 2.5l and automatic transmission.  My question is what all is needed to put a Suzuki Samurai front axle under this vehicle.  I am looking also to lift roughly 4" in the process.

Title: Re: 2003 Chevrolet Tracker 4x4 SAS
Post by: ecoast on January 09, 2016, 08:39:44 AM

Axle, high steer arms, yj's, extended brake lines, driveshaft/spacer.
You'll need to fab spring mounts, perches, etc

sent from an anus from an asus

Title: Re: 2003 Chevrolet Tracker 4x4 SAS
Post by: GrumpyVit on March 08, 2016, 02:49:09 PM

You'll need wheel spacers and wider wheels to bring the front axle width inline with the rear. Link arms and if your going to trouble yourself with a live axle front, go for coilovers.