ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: RideorDie on June 27, 2016, 07:14:31 PM

Title: Fender cutting
Post by: RideorDie on June 27, 2016, 07:14:31 PM

Hey guys really looking into cutting the fenders on my samurai. My brother recently did it to his jeep and it took us quite a while. What I am wanting to know is what is the best tool to use for cutting fenders.

Thank You

Title: Re: Fender cutting
Post by: nprecon on July 01, 2016, 08:38:46 AM

The BEST would probably be a plasma cutter while following the line over the top of a pre-cut mold for the cut line.  The next best, probably a 3" or 4.5" die grinder with a cutting wheel, again tracing over a mold you want to cut to keep the lines even and uniform on both sides.  Beyond those two... I guess it would then be an acetylene torch and then tin snips.