ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 95XL7 on March 16, 2004, 11:33:09 AM

Title: Wheel Studs?
Post by: 95XL7 on March 16, 2004, 11:33:09 AM

Who makes longer wheel studs that will fit our Suzuki's? The stock studs don't stick out far enough for my aluminum wheels,the lugs only get a few turns.

Title: Re: Wheel Studs?
Post by: wildgoody on March 16, 2004, 03:41:28 PM

Check Napa, I think the studs are 12mm 1.5 thread
or is it 1.25 thread, I don't remember now.

Title: Re: Wheel Studs?
Post by: idaholwb on March 16, 2004, 04:09:26 PM

 I think it's 1.25 ;D

Title: Re: Wheel Studs?
Post by: Zukipilot on March 16, 2004, 09:59:27 PM

I'm sorry, I thought you had a question for a 4-wheel Stud ;D Oh, well back to reading posts.
Zig :P

Title: Re: Wheel Studs?
Post by: Rhinoman on March 16, 2004, 10:39:35 PM

Its 1.25. I have the same problem at the moment but I am told there are different nuts that go further inside the wheel? It seems like there must be some simple answer or there are an awful lot of Vits driving around here with there wheels only just held on.

Title: Re: Wheel Studs?
Post by: RBEBY on March 17, 2004, 02:35:19 AM

the  wheel studs are stamped #336 metric 10.9--12x1.25 37mm long  stock length, the longer studs( 6mm longer) are 43mm long  12x1.25   part #610-402 |removethispart|@ orrilleys auto parts