ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: real_red_wagon on May 18, 2005, 03:14:11 AM
-
what do you need and how do you put trackick 3rd members in a sammi
the Real Red Wagon is under the knife right now so I need a rig for gonzukin, I know I'll bring my daily driver '87 TinTop ::) I'll do a quick SPOA and run my 31/10.50 MTR's no big deal but I want to put my old 4.30's from the Real Red Wagon in it in place of the 3.73's and weld the rear. so whats the best/easiest/cheapest way to do it(keep in mind when I get back home it all goes to stock no spoa, no tyres, no gears, stock daily driver ;))
-
I duno take the front and rear end out of the redwagon, and put it in the tintop?
then swap them back when you get home?
-
the third members from a kick don't just bolt on a sammi they need to be modifyied but I'm not sure how I've many different takes on this
-
From what I recall ...
The trac/kick *front* *gears* can be used in samurai housings. (not the trac/kick third member, just the front R/P). (I believe this applies to both sami front and rear). So you need 2 front track/kick R/P sets, and install them into the sami carriers.
The trac/kick rear third and axel housing can be used to make a hybrid rear end. Essentially you're welding the sami axel tubes to a kick/trac diff housing and using the kick/trac rear third (which is drilled to bolt to the sami driveline).
TrailTough has a "package" that looks hard to beat. You get a sami front end setup with trac/kick R/P and the hybrid rear (and third) setup too. Considering the work to make the hybrid rear, the sourcing of the misc parts, the "setup"of the gears ... TT looks cheap.
-
Actually I believe that the sammy and earlier kick fronts are 100% interchangable on the housings AND axles. No need to swap gears.
The rears are another story.
~Nate
-
so the redwagon is a sami and the tt is a Kik?, cause ppl put solid front ends into the sidekicks , i thought both were samies thoe.
-
the Real Red Wagon is the kick the TinTop is the sammi ;D
-
Heeeey Tubs, I tried to put Kick gears in a Sammi, and I sunk my Janga-Jang. Uhhahhahhahhhahhhhh, Carmel Corn for President please! ;D ;D ;D ;D ;D