ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: skidr1 on February 23, 2004, 03:15:29 PM
-
Does anyone know off hand which manufactures stock wheels will fit the tracker/sidekick? My local Pennysaver and auto trader type papers are full of take off wheels:
Jeep Wrangler and cherokee
chevy 5 lug truck wheels
ford five lug trk wheels
etc. Are the bolt paterns right on any of these?
-
yep i think the ford 5 lug nut will fit the ford f-150's are 5 on five and a half i think and they fit sidekicks
-
yep i think the ford 5 lug nut will fit the ford f-150's are 5 on five and a half i think and they fit sidekicks
ya they do.
I know Mac is running ford rims.
-
I think the Wrangler's are a bolt on too.
-
You are looking for 5 on 5.5" wheels.
Ford F150 trucks used these up until around 95 then they went to a metric size,  also full sized Jeeps... whatch out for the newer models, most use 5 on 4.5" wheels
later model dodge trucks(mid to late 80's and up) also use the 5 on 5,5" bolt patern.
be sure to check the center hole  and back spacing
too .
ÂÂ
-
Does anyone know off hand which manufactures stock wheels will fit the tracker/sidekick?  My local Pennysaver and auto trader type papers are full of take off wheels:
1-Jeep Wrangler and cherokee
2-chevy 5 lug truck wheels
3-ford five lug trk wheels
etc.  Are the bolt paterns right on any of these?
1- Nope, the wrangler and cherokee will not fit. The CJ rims will fit though
2- I'm not sure about this one but I'm thinking no.
3- Yep, these will work on the older Fords. Just check the lug spacing for 5 on 5 1/2 and make sure the center hole is larg enough for your hub.
Zig
-
Hey, new black steel rims aren't that expensive. You might be better off that way. You can even custom your own back-spacing if you want. It just takes a little more time.