ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: trk2ajk on January 29, 2004, 10:32:45 PM

Title: need brackets to lift bumper w/2" body lift
Post by: trk2ajk on January 29, 2004, 10:32:45 PM

i am gonna install rro's 2" body lift and a set of thier spacers. i need some body to fab the brackets so i can raise the bumpers at the same time i do the body lift.
 if you have pictures yours, let me have em, if you will make me a pair for front and back, email me or respond.
 thanks, tommy

Title: Re: need brackets to lift bumper w/2" body li
Post by: chrisvitarasport94 on February 03, 2004, 07:28:42 AM

If you've gone ahead by now I guess you'll have some ideas already. It was a concern to me and I raised similar Q's to be told "they all differ". In the event I used 3 of 2" tubes and longer bolts at the rear ( and hammered down the lower fixings ) and 2 of 2" strips at the front, picking up only the rearward pair of each the 2 pairs of holes on each side of the front fixing.

Title: Re: need brackets to lift bumper w/2" body li
Post by: cj on February 03, 2004, 08:40:26 AM

Yeah, Suzuki kept changing the setup for attaching the bumpers. They are different for the 2dr, 4dr and the sport. What a pain as I am trying to swap the front bar from my 2dr to my new 4dr.