ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Alaska101 on January 28, 2004, 12:34:49 PM

Title: Header Fab ???
Post by: Alaska101 on January 28, 2004, 12:34:49 PM

I'm gong to fab up my own header as it is expencive to have one shipped from the U.S. and I don't like what I've seen. I've made them for Gm, Ford, mic. What I want to know is what header you have and what the runner size is. Also Photos would be great!

Thanx Guys


Form your cold Canadian Todays temp - 35c with wind chill -45c, it's so cold it froze the balls off a brass monkey!!! :o

Title: Re: Header Fab ???
Post by: Alaska101 on January 29, 2004, 01:04:05 AM

TTT

Title: Re: Header Fab ???
Post by: wildgoody on January 29, 2004, 01:17:08 AM

I got about $100 and 4 days of after work time
into my turbo header, so if you can weld it should
be a little cheaper, but remember I used Sched 40
weld elbows to build mine, if you go supercharger
you will have extra heat to worry about too, just
not the back pressure.