ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: hcgalvin on January 15, 2004, 05:35:43 AM

Title: 2 low conversion for track-kicks
Post by: hcgalvin on January 15, 2004, 05:35:43 AM

Hey, we are going to have the tcase apart soon for those gears, and I was wondering about the 2-low conversion for the tcase. I thought, since I had it apart... ;)

Is there a way to do this without purchasing a kit? Can I just remove a ball or something? If so, what are the steps to doing this?

Heather

Title: Re: 2 low conversion for track-kicks
Post by: Zukipilot on January 15, 2004, 05:41:57 AM

Mike wrote an article on the Kit, maybe that would help a little??? We looked at trying to make something when we had mine apart, and could not determine how to do it without fabing alot of stuff. Scott had fabed some kits for Heeps but said that one would take a wile to figure out and build from scratch. How much is the Kit?

Zig

Title: Re: 2 low conversion for track-kicks
Post by: Mikerpm4x4 on January 15, 2004, 05:43:46 AM

No. The two replacment rods have a few added slots to them.  All the ballbearings are retained. I think to replicate it would be very dificult if you werent an experienced machinist. Definately put one in, I cant tell you enough how nice it is. Only downside is I forget that Im in 2 low when I come up on an obstical. I think that will go away after some time getting used to having it.

Mike

Title: Re: 2 low conversion for track-kicks
Post by: Mikerpm4x4 on January 15, 2004, 05:44:57 AM

I think the kit is $100.

Title: Re: 2 low conversion for track-kicks
Post by: hcgalvin on January 15, 2004, 06:13:36 AM

Thanks for the info!

Title: Re: 2 low conversion for track-kicks
Post by: Zukipilot on January 15, 2004, 06:15:50 AM

Quote

I think the kit is $100.

How fast could you put one in at camp ;D
Zig

Title: Re: 2 low conversion for track-kicks
Post by: ebewley on January 15, 2004, 06:29:13 AM

http://www.zukiworld.com/month_120103/feature_rro2wdlowkit.htm

Title: Re: 2 low conversion for track-kicks
Post by: jagular7 on January 15, 2004, 03:16:38 PM

Does this kit provide the opportunity to have either front or rear axle alone in 2wd, hi or low?

Title: Re: 2 low conversion for track-kicks
Post by: track_this on January 15, 2004, 05:12:17 PM

rear 2wd only but in the low range gears, like 4-low but the front not working persay. hope that clears up some things.   shane ;)

Title: Re: 2 low conversion for track-kicks
Post by: aceluck on May 29, 2006, 08:22:49 AM

Hey, check out this old thread!

Does this kit work on 1999-2005 Trackers and Vitaras, or just track-kicks. I Could have used 2 Low this past weekend.

Thanks all.

Title: Re: 2 low conversion for track-kicks
Post by: the_maplebar on May 29, 2006, 09:27:51 AM

The automatics have the same tcase as TrackKicks so it should work.  If you have a mt then I doubt it.

Note, the tcase in the automatics may have changed at some point.  Calmini and Trailtough say the tcase gears work from 99-2001/2002