ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Build Diaries, How-To, DIY => Topic started by: wildgoody on January 06, 2004, 04:06:29 AM

Title: Tires and Gears and Speed Calculator
Post by: wildgoody on January 06, 2004, 04:06:29 AM

I have included a link on the Project Turbo SideKick
site to help in the calculation of gears and tires, new
speed readings and how far off or not your mods have
made your speedo readings.

These are the easiest ones to use that I have found,
and thought it appropriate and helpful to include them
for everyone to use. Compliments of Mark at 4lo.com

Would have helped to include the link.

http://wildcatent.freeyellow.com/zookmods

Title: Re: Tires and Gears and Speed Calculator
Post by: mrfuelish on January 06, 2004, 05:20:27 AM

So what kind of gears would go into a red samurai for the mall ;D Thank's for the calc that makes it almost too easy.

Title: Re: Tires and Gears and Speed Calculator
Post by: 1bigtracker on January 06, 2004, 10:56:11 AM

whats the real stock tire size of a tracker?  lata stu

Title: Re: Tires and Gears and Speed Calculator
Post by: wildgoody on January 06, 2004, 11:12:02 AM

205-75x15 plug that into the metric tire size
calc at the bottom of the page and it will give
you the Dia. in Inches  :)

Title: Re: Tires and Gears and Speed Calculator
Post by: NY_SIDEKICKER on January 06, 2004, 11:23:04 AM

CAN SOMEONE SAY POP UPS  ::)

Title: Re: Tires and Gears and Speed Calculator
Post by: wildgoody on January 06, 2004, 11:29:31 AM

Ya stupid pop ups, I'm sorry about that but
hey its a free 50 Meg site and I can use it to
host all kinds of stuff, I've tried to remove the
pop ups but it's automaticaly put in by the server
:P

Title: Re: Tires and Gears and Speed Calculator
Post by: NY_SIDEKICKER on January 06, 2004, 11:32:18 AM

NO PROBLEM ....WAS JUST TEASING YA... ;D   EVERY FREE SIGHT SEEMS TO HAVE THEM .... :-/

Title: Tires and Gears and Speed Calculator
Post by: ack on January 20, 2008, 07:39:14 AM

Here is a link to a gear calculator at Ack's FAQ that let's you plug in tire size and engine RPM to determine vehicle speed based on gear ratios:

http://www.acksfaq.com/gearcalc-01-04-07.php (http://www.acksfaq.com/gearcalc-01-04-07.php)

It is set up with the most common available gear ratios available for the Suzuki Samurai.  There is also a link to a generic calculator on the same page where you can plug in your own valuse.