ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: MrBoooots on February 13, 2020, 04:55:44 PM

Title: Help! 1986 Suzuki Wheel Spacers Question
Post by: MrBoooots on February 13, 2020, 04:55:44 PM

Hey guys,

Question - Currently rebuilding a 1986 Suzuki Samurai.  Need to put spacers on it as we are running larger tires, but I can't seem to find any that will fit?  I'm showing a bolt pattern of 5x132mm or (5x5.19685").  All the spacers i'm seeing online are for 5x5.5, or 5x127mm, etc....   Anyone had this problem, or can point me in the right direction?

Thanks!

Title: Re: Help! 1986 Suzuki Wheel Spacers Question
Post by: fordem on February 13, 2020, 05:27:30 PM

As far as I'm aware the Samurai uses a 5 x 5.5" (or 5 x 139.7mm) bolt pattern - have you measured yours?

Title: Re: Help! 1986 Suzuki Wheel Spacers Question
Post by: MrBoooots on February 13, 2020, 05:44:28 PM

Yes i've measured.  Definately 132mm from center-to-center on wheel studs, not 139.7?

Title: Re: Help! 1986 Suzuki Wheel Spacers Question
Post by: fordem on February 14, 2020, 06:09:35 AM

You can only measure "center to center" if there are an even number of studs.