ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Performance / Modify => Topic started by: SybilsWays on February 17, 2020, 01:56:05 PM

Title: 1988 Suzuki Samurai 1.3 4X4 No Spark
Post by: SybilsWays on February 17, 2020, 01:56:05 PM

We installed a used engine that and after install it started but the water mixed with the oil. I took the head off and had it checked along with a valve job. Put it back together and now no spark.
The distributor rotor is turning, we have power to the coil and no spark.

What are your thoughts?

Title: Re: 1988 Suzuki Samurai 1.3 4X4 No Spark
Post by: fordem on February 17, 2020, 05:40:15 PM

Check for spark at the coil - if you're not getting a spark there you most likely have an electrical issue, if you have a spark there but not at the plugs, the distributor is probably installed incorrectly.