ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 92Sidekick4x4 on April 26, 2005, 12:41:38 PM
-
ok, i think i have a problem. I have 3 wheels 15"x8" that i got and one is 15"x7.5" woudl there be a problem if i used the odd sized wheel on my kick? with the 15x8's?
-
If you don't tell we won't ;D
-
so there is no difference i wont notice anything?
-
I've never heard of a 7.5 " wide wheel. Are these aftermarket? The difference would be so slight I doubt if you would notice anything if the backspacing is the same.
-
damn, just went out and looked at the smaller wheel, the whole in the center is an inch smaller then all the others, ill hav eto take it back to the wreckers tommrow
-
Oops ;D
-
Oops ;D
yep, what a maroon
-
yep, what a maroon
Happens to the best of us. :)
-
If the hub hole is smaller, it sounds like the bolt pattern might be smaller too....
-
Ford rim?
-
I was just looking at a local 70's Bronco racer for sale, caged, no interior, sprint-style wing for a roof, etc... Anyway, it had 4 wagon wheels on it; 3 15x7.5 with small holes and one 15x8 with large hole.... what a coincidence! LOL!!!
-
Ford rim?
yup off a 1990 half ton
-
My wheels came off a '79 Bronco. The later model Ford's have the same bolt pattern but the hub hole is too small. :-/
-
Hey Spencer :) You should swing by the house I have some rims and tires that would work for you.
-
nice! which tires?/rims?
i hurt my self at work so im down in vic for a while tilll my shoudler is a bit better i may swing back up there on friday or sat to do soem office stuff, lemme know
ill stop by asap
-
Hey I was thinking about 15 x 8 wheels...how far outside the fender wells to they stick out...Do you have a pic?
-
lada niva rims have smaller hub holes I think... wanted to throw some 5 spoke niva wheels on my friends sami but the hub holes to small!! same bolt pattern though..... my sami's sitting on stock16x7 mid 60's mercury truck rims... but what I really need is stock willys jeep 16's ( narrower and better backspacing )... but thats a different story all together
-
lada niva rims have smaller hub holes I think... wanted to throw some 5 spoke niva wheels on my friends sami but the hub holes to small!! same bolt pattern though..... my sami's sitting on stock16x7 mid 60's mercury truck rims... but what I really need is stock willys jeep 16's ( narrower and better backspacing )... but thats a different story all together
Trev, i may be able to help you out with the willy's wheels, ill tell u bout it on msn next tiem yer on
-
If your looking for narrow 16 inch rims you might want to check out 60's era Scouts. Scouts are 4 wheel drums though so there might be a problem with clearing the disk breaks. I think I have 5 or 6 of them.