ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Technical Discussion - Beginner / Repair => Topic started by: ontario410 on August 26, 2025, 08:12:52 AM

Title: 1983 sj410 rear wheel studs
Post by: ontario410 on August 26, 2025, 08:12:52 AM

I found that the previous owner had wedged a carriage bolt in the axle shaft hole to replace a broken stud. I took a stud to the local auto parts store and they have no idea what size it is or where to get it. They keep telling me in imperial but I'm pretty sure it's metric. Any idea of a brand or part number for new studs?  Thanks

Title: Re: 1983 sj410 rear wheel studs
Post by: fordem on August 27, 2025, 05:22:29 AM

It's a metric stud, and whilst I don't have the size, it's the same part number (#09119-12003) as used on the Samurai (SJ413) and if all else fails, available from megazip.net.

Title: Re: 1983 sj410 rear wheel studs
Post by: ontario410 on August 28, 2025, 04:51:25 AM

Beauty . Thanks.

The parts lady was adamant they were Imperial haha. I told her I didn't think so

I found some studs from Dorman that should work according to specs . I will pick them up today and post the part number if they do.

Title: Re: 1983 sj410 rear wheel studs
Post by: ontario410 on August 28, 2025, 08:01:51 AM

Dorman 610-399 are exactly the same just a few threads longer

Title: Re: 1983 sj410 rear wheel studs
Post by: ontario410 on August 28, 2025, 09:18:30 AM

Quote from: ontario410 on August 28, 2025, 08:01:51 AM

Dorman 610-399 are exactly the same just a few threads longer