ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: UberAsuna on December 29, 2003, 12:57:37 PM
-
Anyone ever had this problem ??
every freakin bump i get the door makes a lot of noise seems a little loose on the lock i think but i got no clue :(
can anyone help me thx
if i shake the door it moves a tiny bit and i only have a 215x75x15 as a spare not like the tire that would be too heavy lol ...
-
My sami with 31's was doing the same thing until I adjusted the catch for the mechanism. But then I noticed now spot welds are cracking along the side. :( I built a rear bumper so now I need to do a swinging tire rack. :)
-
Anyone ever had this problem ??
every freakin bump i get the door makes a lot of noise seems a little loose on the lock i think but i got no clue :(
can anyone help me thx
if i shake the door it moves a tiny bit and i only have a 215x75x15 as a spare not like the tire that would be too heavy lol ...
We had the same problem when we had the 31 inch spare tire on the door.
Our 4 door had a little black round disk-like device that was about as big in diameter as a hocky puck.  It has a bolt running through the center of it.  It is attached to the door. ÂÂ
The 'catch' for this hocky puck-like device was on the truck.
If you loosen up the bolt on the rubber 'striker' and adjust it to better support the door in the 'catch', it may solve your problem.
Good luck,
~Nate
-
i had the same prob. of course my tail gate has been bent in half more than once. once my sis was riding behind me when i had my 34 in spare on a home made steel rim on thier and she thought it was going to fall off. lol i don't run the spare anymore, for more resonse than one. lata stu