ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: jagular7 on November 30, 2003, 11:22:11 AM

Title: Front axle centerline alignment
Post by: jagular7 on November 30, 2003, 11:22:11 AM

While I had the front wheel off my XL-7, I noticed the center of the axle hub was not aligned with the output of the differential housing. From underneath the driver's side, it's about 1.5"-2" off centerline of the axle housing. I've got to wonder why? I wonder if Calmini's lift corrects this at all? I've read the lift does move the front tire forward, but then wouldn't the axle shaft get longer (may interfere with the lockout?).

Title: Re: Front axle centerline alignment
Post by: Mikerpm4x4 on November 30, 2003, 11:29:28 AM

Its not enough angle to need to move it. I wouldnt worry about it.

Mike