ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bandit86 on November 20, 2003, 07:27:51 AM
-
I just bought my truck and got an oil change the day I bought it home.  For years I always used QS oil and filter without problems.  For some strange reason, I have what appears to be lifter noise above 2k rpm.  I remember the article on oilfilters and QS is basically the fram, which is bad m'kay, so which do you guys use.  Pennzoil good?  Motomaster?
-
I use Purilator (sp) and have no problems...plus I have heard good things about them....
Good Luck! Joe
-
http://minimopar.net/oilfilterstudy.html
Don't use Motomaster, they are made by FRAM. You can check the back plates on them and see.
Go to Canadian Tire and buy the K&N HP-1002. It'll cost almost $20, but it's the best oil filter on the Canadian market.
As for oil, I only use Mobil 1.
-
I use castrol oil, and an AC Delco filter... (but my motor is chevrolet)
-
NAPA/WIX filters or Purolator. Never Fram
-
I use the Mobil1 filter, its priced between the cheapo frams and the expensive K&N.
-
I would use an AC Delco filter, but im a stickler on using factory parts. Ispeacilt fiters and engine parts.
-
I like the Dark Blue Purolator. I noticed a difference with the Check valve and idle time. Much nicer warm up time and i feel better about that.
Haven't used a Napa/Wix yet does it also have a Check valve?
-
What's "Check Valve"?
-
I use Suzuki Genuine Products (SGP). Never a problem there.