ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: van7559 on November 11, 2003, 02:28:28 PM

Title: 3 inch Body Lift
Post by: van7559 on November 11, 2003, 02:28:28 PM

i HAve a 95 tracker and just had a three inch body lift put on. Calmini says you can't use your old boots, so what did you guys do?? I can't have a gapping set of holes in my truck

Title: Re: 3 inch Body Lift
Post by: NY_SIDEKICKER on November 11, 2003, 02:30:14 PM

MY BOTTOM ONE IS ON WITH NO PROBLEMS....... BUT TOP BOOT WAS RAISING HOLY HECK WITH POPPING TRANNY OUT OF GEAR , SO ITS NOT BACK ON YET..BUT WILL PROBABLY BE LOOKING INTO GETTING IT BACK ON SOON.......

Title: Re: 3 inch Body Lift
Post by: Natebert on November 11, 2003, 03:54:15 PM

We are using BOTH of our old boots on our 3 inch body lift.  (we extended both of the shift levers 3 inches too)

But we did have to flip the 4wd shifter boot around to keep it from pulling it out of gear.

~Nate

Title: Re: 3 inch Body Lift
Post by: Zukipilot on November 11, 2003, 09:06:11 PM

I also have both boots. I also extedned both shifters, but I bent my console mounting brackets to move the console back about 1/2 inch and it works fine.
Zig

Title: Re: 3 inch Body Lift
Post by: 1bigtracker on November 12, 2003, 12:27:34 PM

The inside of my tracker is bare bones.(other then the CD player and heater)  the floors are coverd in about 3 heavy coats of under body liner and its all muddy and crapy looking so only having the small shift boot fits it great.  I had hole in the floor from other stuff untill i went up the riven(A.K.A a hole that on a watery day the water goes over the hood) and the water came though the floors and up to my wast.  hello cocking gun.   lol  lata Stu

Title: Re: 3 inch Body Lift
Post by: tonka-toy on November 13, 2003, 12:53:31 AM

the base rubber on the 4wd shifter ( the one that looks like someone has cut out a starfish) all i did was to cut this front to back and no more jumping out of 4wd for me ;)