ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: wildgoody on November 03, 2003, 02:26:08 PM
-
I drew up a bitmap of the 4" body mount.
has to be looked at as a bitmap, here is
the link. Use Microsoft Paint to view.
I didn't do a drawing of the front mount, but I think
you will get the idea, it's similar, but 1 peice and
less welding, stud welded on the bottom, and a nut
welded inside the top for the bolt to screw into.
http://wildcatent.freeyellow.com/zookmods/body-mount.bmp