ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: tsleong on May 08, 2005, 09:29:16 PM

Title: SJ410 transfer gear install into samurai
Post by: tsleong on May 08, 2005, 09:29:16 PM

Have anyone install the gear from a SJ410 transfer into a Samurai transfer case? I know this will give me some reduction in both high and low. Can this be done?

Title: Re: SJ410 transfer gear install into samurai
Post by: nc_zuk on May 08, 2005, 09:45:32 PM

Why not just install the whole 410 t-case? People have been doing that for years and years ;)

Title: Re: SJ410 transfer gear install into samurai
Post by: tsleong on May 08, 2005, 09:59:05 PM

If it can be done, then some machining with the gear to mix and match with Samurai and I can get 4:1 ratio for low gear.

Title: Re: SJ410 transfer gear install into samurai
Post by: Rhinoman on May 08, 2005, 11:56:51 PM

There is an srticle somehwere on the web about this. It does require maching and welding. I do know at least one of the guys on Difflock has done this. Try a search on the forum for 'lobster'. You have to have an early (pre 85 I think) transfer case.

http://www.difflock.com