ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: bandit86 on October 27, 2003, 12:15:12 PM

Title: short shifter problem.
Post by: bandit86 on October 27, 2003, 12:15:12 PM

With my body lift, the shifter is too short.  I'm going to cut and weld, but there is a rubber between the two parts.  Is it neccessary for vibration or can I cut that out?

Title: Re: short shifter problem.
Post by: hcgalvin on October 27, 2003, 02:34:06 PM

Try this?

(http://www.whitepineclub.com/members/kd7hcg/pictures/bodylift/DCP02485.JPG)

This is cut and extended 3" at the base before the bend.

Heather

Title: Re: short shifter problem.
Post by: wildgoody on October 27, 2003, 03:06:00 PM

Thats a nice weld Heather, You do that ???