ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Natebert on October 20, 2003, 04:35:23 PM

Title: 1995 4door 'CAL' idler arm ?s
Post by: Natebert on October 20, 2003, 04:35:23 PM

Gang,
Was going to order an Idler Arm Brace from 'CAL' due to the larger tires, and was informed that it wasn't available for a 1995 4door.
I see that their website says 89-95 2door, whats the diff with the 4door.  

I've heard/read that it's a 'tab' that can be ground off or something to that effect?  
Does anybody have the straight dope on the subject?

~Nate

Title: Re: 1995 4door 'CAL' idler arm ?s
Post by: HotRod on October 20, 2003, 04:51:27 PM

The 95 is missing a tab to bolt the brace to so all you gotta do is bolt it on one end and weld a tab on the other. Thats all I did.

Title: Re: 1995 4door 'CAL' idler arm ?s
Post by: NY_SIDEKICKER on October 21, 2003, 02:13:53 PM

I WAS WONDERING THE SAME THING  ::) SOUNDS SIMPLE ENOUGH  ;D MATTY D.

Title: Re: 1995 4door 'CAL' idler arm ?s
Post by: Natebert on October 21, 2003, 03:34:03 PM

Thanks, that sounds simple enough.  Or just fab my own bracket from scratch..

Thanks!
~Nate

Title: Re: 1995 4door 'CAL' idler arm ?s
Post by: wildgoody on October 22, 2003, 04:54:25 AM

If it don't fit, get a bigger Hammer!!
or make your own!!  I build all my
own parts, I like to design and
build my own stuff.