ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 6feetofAIR on October 15, 2003, 06:35:20 AM

Title: samurai moter mounts/stock not tough enough
Post by: 6feetofAIR on October 15, 2003, 06:35:20 AM
any body know who or where i can get some beefy motor mounts for my samurai? i blew two of the three jumping so my engine flops now, i feel the stock ones are just unadequate and i want some that will not seperate, a shaft through an eve type of mount?! discuss!!!!
Title: Re: samurai moter mounts/stock not tough enough
Post by: mrfuelish on October 15, 2003, 07:10:15 AM
Trail tough has them, about 200.00 for the front mounts and 59.00 for the rear. im running petro works mounts but they lower the engine and have it sit at an angle to clear the exhaust and you have to cut the fan shroud. hope that helps!  try trailtough.com
Title: Re: samurai moter mounts/stock not tough enough
Post by: ebewley on October 15, 2003, 07:13:46 AM
Quote
any body know who or where i can get some beefy motor mounts for my samurai? i blew two of the three jumping so my engine flops now, i feel the stock ones are just unadequate and i want some that will not seperate, a shaft through an eve type of mount?! discuss!!!!


Hawk 888-SAMURAI sells a heavier mount. I believe it is a Sidekick engine mount but I am not sure. Call them. I think Petroworks has a different mount too that is sold as part of their 1.6 8 valve conversion kit.

-Eric
Title: Re: samurai moter mounts/stock not tough enough
Post by: Mr._Owl on October 15, 2003, 08:26:52 AM
Hi Kids,

I'm a newbie to the board (sort of, been lurking for a while).  Take a look at roadlessgear.com for motor mounts.   roadlessgear.com/page/RGL/PROD/E/RG241

See ya around.
Title: Re: samurai moter mounts/stock not tough enough
Post by: 6feetofAIR on October 15, 2003, 11:51:06 AM
nice link and good looking product for a cheap price, can anyone vouch for this product? WHAT I MEAN IS ANYONE HAVE THEM AND HOW ARE THEY? sorry for shouting lol
Title: Re: samurai moter mounts/stock not tough enough
Post by: mrfuelish on October 16, 2003, 08:56:44 AM
You should of said CHEAP in the first place! I think the 1978 or so dodge power wagon moter mounts fit with a little work (drilling out the hole to half inch or maybe seven sixteenths) and only about 7.00 each do a search on pirate4x4.com they give you the part numbers or check a few other zuk parts suppliers for life time mounts (you will pay more but the same thing. 440 power wagon) good luck!