ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 92Sidekick4x4 on April 29, 2005, 09:27:58 AM

Title: Calmini header w/ o2 censor
Post by: 92Sidekick4x4 on April 29, 2005, 09:27:58 AM

If i get the calmini header will i need to drill a hoel in it for the o2 censore? anyoen else do this or what did u guys do?

Title: Re: Calmini header w/ o2 censor
Post by: Zukipilot on April 29, 2005, 09:35:49 AM

It looks like they already have them ready for the O2. I know the 8V is and the 16V looks like it is ready for one also.

Zig

(http://puresuzuki.com/SS700Yfs1.jpg)

(http://puresuzuki.com/16V-Headerfs.jpg)

Title: Re: Calmini header w/ o2 censor
Post by: mahimahimo on April 29, 2005, 09:51:06 AM

yea i no the 8 v has one ... atleast mine form calmini did....all u need to do is extend the wires so they reach and its all good

                          -mo

Title: Re: Calmini header w/ o2 censor
Post by: 92Sidekick4x4 on April 29, 2005, 10:23:08 AM

ah, cool thanks, hwo would i extend the o2 censor just cut the wires then use a but end connector and put longer ones in?

Title: Re: Calmini header w/ o2 censor
Post by: 1bigtracker on April 29, 2005, 10:35:00 AM

i would recomend you use some heat shrink tubing also where ever you cut the wires.

stu

Title: Re: Calmini header w/ o2 censor
Post by: Hawklin on April 29, 2005, 06:17:23 PM

Yeah heat shrink and I would think soldering the wires would be preferred to just splices