ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: r3cc0s on April 22, 2005, 02:40:15 PM

Title: LETS GO!
Post by: r3cc0s on April 22, 2005, 02:40:15 PM

(http://img.photobucket.com/albums/v488/r3cc0s/monstertracker.jpg)
(http://img.photobucket.com/albums/v488/r3cc0s/monstertracker2.jpg)

Title: Re: LETS GO!
Post by: purevil71 on April 22, 2005, 02:42:47 PM

wow...thats big!!!

Title: Re: LETS GO!
Post by: bandit86 on April 22, 2005, 03:13:05 PM

I dont think the factory strut mount is strong enough to support a v8 in a tracker.  it's nice, but you may wanna think about fabbing up some spring supports.   especially if your shocks are hooked up to the same thing.  What engine is that?  

Other then that, it looks nice, put up pics of the rear suspension.

Title: Re: LETS GO!
Post by: r3cc0s on April 22, 2005, 03:23:24 PM

1.6 16v  ::)

4 link in the back

Title: Re: LETS GO!
Post by: SiKiD_01 on April 22, 2005, 03:37:21 PM

what are the tyres on the back called? i like them a lot. they look different from the ones on the front, but imagine them to be swampers of sorts.

thanks.

Title: Re: LETS GO!
Post by: r3cc0s on April 22, 2005, 03:44:10 PM

look close
they're boggers with a a staggered strip of lug removed

Title: Re: LETS GO!
Post by: mesjr2004 on April 22, 2005, 04:27:09 PM

looks like a ford motor to me

Title: Re: LETS GO!
Post by: 37kicker on April 22, 2005, 06:17:41 PM

302 or 351 even better  ;D what size tires 35 s or 39.5 s dosnt matter looks like fun to me. lets go play!!!!

Title: Re: LETS GO!
Post by: Chief on April 23, 2005, 04:45:40 AM

Reenforce upper coil buckets, add a snoprkal, and LET'S GO!!!!!

That things sweeeeeet!  8)

You got more pics of the cage? I Like that exo design!

Title: Re: LETS GO!
Post by: jagular7 on April 23, 2005, 01:40:50 PM

As I own a Bronco, the frame looks Ford to me. Those spring buckets are definately Ford as well as those 3 bolts holding the steering box in. In the 2nd pic, you can see the engine crossmember. This used to be a 80-96 Ford 1/2 ton. The TTB (twin-traction beam) front axle was bolted to that beam. That little tube on the beam is the stock ps cooler.
The front axle is a ball-joint type and from the size of it, could be a D60. But look real close at that track bar mount on the axle. Very little bead I could see.

Also, not being anyway picky, but there appears to be an extra green tube bar. It's located in the 1st pic where the passenger foot well is. Nothing on driver's side to match.