ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: prairie_dog on July 11, 2005, 09:59:35 AM

Title: drilling tracker pinion flange?
Post by: prairie_dog on July 11, 2005, 09:59:35 AM

 I was wondering if I use my aluminum spacer can I drill the right patern in the flange at home or would it not be acurate enough (or don't be so cheap and have a machine shop do it)

Steve ;D ;D

Title: Re: drilling tracker pinion flange?
Post by: zaggy on July 11, 2005, 10:05:34 AM

IMHO

     Not close enough, get it done in any half decent machine shop.

Zag

Title: Re: drilling tracker pinion flange?
Post by: chet on July 11, 2005, 01:15:01 PM

as long as your spacwer has the lip on it then it should be fine. The lip is what centers the spacer anyways.