ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: 1bigtracker on July 13, 2005, 05:55:20 PM

Title: help with aftermarket coil install(with pics)
Post by: 1bigtracker on July 13, 2005, 05:55:20 PM

Ok some body tell me what wire is the positive(+) and negative(-) so i can put on a accel coil.  One wire is brown with white tracer(would think is positive) and one is black with a white tracer(would think is negative).  and yes i have searched this with no luck(mabey thats just me)

(http://www.omghi2.us/april05/tracker-coil.JPG)

thanks, Stu

Title: Re: help with aftermarket coil install(with pics)
Post by: wildgoody on July 13, 2005, 08:06:37 PM

You could try looking on the old coil,
many times the polarity is marked

Wild

Title: Re: help with aftermarket coil install(with pics)
Post by: Rhinoman on July 14, 2005, 05:06:00 AM

Black/White is usually a positive ignition supply on Jap stuff. The brown and white is more likely to be the switched side (-ve). If you do a search for schematic, theres a link to another site that has the wiring diagrams. If you can't find it I'll check when I get home.

Edit: Black/White is +ve, Brown/White is -ve. I found the info on http://www.suzukiinfo.com

Title: Re: help with aftermarket coil install(with pics)
Post by: zaggy on July 14, 2005, 06:48:38 AM

I'll check my manual and get back to you

Zag

Title: Re: help with aftermarket coil install(with pics)
Post by: zaggy on July 14, 2005, 10:02:12 AM

Arrgh
     No wiring for the engine bay in the Haynes manual...but I think Rhinoman is correct

Zag

Title: Re: help with aftermarket coil install(with pics)
Post by: 1bigtracker on July 15, 2005, 05:48:46 PM

I'm very busy right now dealing with the city and am not going to be able to get this for atleast a few more days, but it will get done with more pics.  thanks everyone

Stu