ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: IKUZUS on April 02, 2005, 01:11:14 PM

Title: 4.62's and a 4.16
Post by: IKUZUS on April 02, 2005, 01:11:14 PM

Anybody run this combo in a Sammi? If so, what size tires do you run?

Title: Re: 4.62's and a 4.16
Post by: bandit86 on April 02, 2005, 02:02:19 PM

different front and rear diff gears?  you are going to kill your transfercase.   Dont, I dont care who said it's ok

Title: Re: 4.62's and a 4.16
Post by: wildgoody on April 02, 2005, 02:39:43 PM

I think he is talking about 4.16 T-case
and 4.62 diff gears, I don't think the
4.16 T-case gears are low enough to
be streetable, I think the setup is best
with the super crawler 8:1 T-case set

Wild

Title: Re: 4.62's and a 4.16
Post by: IKUZUS on April 02, 2005, 03:18:22 PM

4.62 axle gears and a 4.16 tcase. Also have the late model tranny. Thanks for any help.

Title: Re: 4.62's and a 4.16
Post by: mrfuelish on April 02, 2005, 04:50:47 PM

you could run 31's or 33's just fine, with 31's you might be running just a few more rpm's over stock.