ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: budzooka on March 27, 2005, 02:45:37 AM

Title: venting engine!
Post by: budzooka on March 27, 2005, 02:45:37 AM

I have put a toyota carb on my 1.3 and i would like to know what to do with the engine breather line that used to go  to my air filter canister? I plugged it and ended up with some pressure and then some blow by from ??? any ways leaving it open just sends fumes into the cab and i have no line on the carb for it or on my air filter. any help would be appreciated.

Title: Re: venting engine!
Post by: Bigzook on March 27, 2005, 03:07:15 AM

I got one of those little ricer air filters and put it on the end. You could also use a fuel filter of correct size.

Title: Re: venting engine!
Post by: budzooka on March 27, 2005, 03:08:21 AM

thank you. what is a ricer filter?

Title: Re: venting engine!
Post by: bandit86 on March 27, 2005, 03:50:10 AM

drill a hole on the air cleaner assy and attach a fitting so that the fumes from the crankcase will be sucked in through the carb.  you can find something in your local junkyard that'll work

Title: Re: venting engine!
Post by: prairie_dog on March 27, 2005, 03:30:37 PM

 Re: ricer filter,  1-2 inch round filter usually found on valve cover ( ford/chev V8 dress up kit) :D :D

Title: Re: venting engine!
Post by: budzooka on March 28, 2005, 01:25:00 AM

thanks for the help. i have solved that problem and am off to the next one ;D