ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: brlj on August 30, 2005, 01:32:07 PM

Title: Torque specs for ring gear
Post by: brlj on August 30, 2005, 01:32:07 PM
Ok guys, I need torque specs for the ring gear bolts and the carrier bolts. Ive spent my money on Toy conversion parts, sammy 3rd member stuff,and other stuff (26 spline axle and cv), so I dont have a manual yet.

Thanks guys,
Bill
Title: Re: Torque specs for ring gear
Post by: Digger on August 30, 2005, 06:05:34 PM
According to Haynes, the diff carrier bolts are 20 ft-lbs for the sammy, 41 ft-lbs for the Track/kicks. I don't have the spec for the ring gear bolts...
Title: Re: Torque specs for ring gear
Post by: wildgoody on August 30, 2005, 10:05:22 PM
Red loc-tite and a 1/2" impact
you want them tight
Title: Re: Torque specs for ring gear
Post by: mudfkr on September 01, 2005, 12:42:51 PM
I picked up a FSM this week surpecheap  ;D so heres what it say's:

Ring gear 69.5 to 75.5 lb-ft

Carrier Bolts 36.5 to 50.5 lb-ft (front ) 51 to 72 lb-ft (rear)

lock plate bolt 7 to 10 lb-ft.

I have found a new use for my Haynes manual now, it's sitting beside the toilet   :o
Title: Re: Torque specs for ring gear
Post by: SnoFalls on September 01, 2005, 12:52:18 PM
Quote from: mudfkr on September 01, 2005, 12:42:51 PM
I have found a new use for my Haynes manual now, it's sitting beside the toilet   :o
I think using the pages to wipe your a** is probably the best use of that too :)
Title: Re: Torque specs for ring gear
Post by: Digger on September 01, 2005, 01:06:16 PM
That's just harsh! LOL! :-X
Title: Re: Torque specs for ring gear
Post by: mudfkr on September 01, 2005, 02:37:20 PM
Quote from: Digger on September 01, 2005, 01:06:16 PM
That's just harsh! LOL! :-X

No the page's are quite soft actually  ;D  ;D  ;D
Title: Re: Torque specs for ring gear
Post by: wildgoody on September 01, 2005, 10:12:10 PM
Quote
No the page's are quite soft actually

ROFLMAO