ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum

ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: mahimahimo on March 21, 2005, 06:45:59 PM

Title: what size
Post by: mahimahimo on March 21, 2005, 06:45:59 PM

alright finaly gettin things together..... im puttin some 2 in coil spacers and  eventually a 2 in body lift....was wondering what size tires u guys think i shoudl go with that will fit with just the coilspacers  (cause ive got them now and still gotta get the body lift) i was thinken of somethin like 31x10.5x 15's ......oh yea they gonna be goin on some 15x8 mickey thompson classic 2 wheels.....thanx

                                                            -mo

Title: Re: what size
Post by: mahimahimo on March 21, 2005, 06:48:06 PM

oh yea they goin on a 94 traq

Title: Re: what size
Post by: Digger on March 22, 2005, 03:58:59 AM

31's will fit nice with both the 2"coil spacers and the 2" body lift, but they will be really tight and will probably rub with just the coil spacers. I run 31's with 3 inches total of lift and I had to hammer the floorboards back an inch...

Title: Re: what size
Post by: chrisvitarasport94 on March 22, 2005, 06:15:59 AM

just radius the back 1/3rd of the front arches & the front 1/4 of the rear arches and you'll be ok with 31"s

Title: Re: what size
Post by: Rhinoman on March 22, 2005, 07:24:57 AM

Its going to depend on how much offset you have on the rims. More offset means more cutting of the arches, less offset means more hammering of the footwells.

Title: Re: what size
Post by: mahimahimo on March 22, 2005, 10:24:04 AM

Posted by: chrisvitarasport94 Posted on: Today at 12:15pm
just radius the back 1/3rd of the front arches & the front 1/4 of the rear arches and you'll be ok with 31"s  
            ok dont mean to sound like a dumb |removethispart|@ss but what do u mean...lol htanx

                                           -mo

Title: Re: what size
Post by: Chief on March 22, 2005, 08:26:24 PM

With a 2" spacer lift, I clear 31" LTB's. This is only after I cut the rear most part of the front fender well back about 4-5 ", and cut and moved/hammered the floor board! Still rubs a bit at full stuff, and the rear rubs the fender wells when they are stuffed.

Title: Re: what size
Post by: real_red_wagon on March 23, 2005, 04:03:44 AM

    I ran a 2" body lift and 2" coil spacers with 235/75/15 and although I could have fit a larger tyre the 235's never rubbed(no trimming required), I got tons of articulation, and I didn't have to mess with my gears. the truck performed very well with that combo. (I never broke anything in front axle that way either)  ;D but if you ask 1bigtracker he's got like a 4" bodylift and runs 34"LOL ;D  Make It Hert!!!

Title: Re: what size
Post by: mahimahimo on March 23, 2005, 08:22:17 AM

hmmmmm now u got me thinkin what would be the best set up to do.....decisions decisions.....

                                              -mo

Title: Re: what size
Post by: mahimahimo on March 23, 2005, 05:56:14 PM

what do all of u guys reconmend... it gets used off road but is used as my daily driver .... could use some input on which way to go thanx.....

Title: Re: what size
Post by: LawDog on March 24, 2005, 12:49:41 AM

Lot's of trimming or smaller tires, or rub pretty good when you're wheelin'. Those are pretty much you're options.  I recommend getting some 235's and makin' it hert.

--Mr. Zook 8)

Title: Re: what size
Post by: mahimahimo on March 24, 2005, 12:59:26 PM

ahhh crap... i just sold my 235's now im kinda pi$$ed...wa bout 30's?

                                                     -mo

Title: Re: what size
Post by: derekj on March 25, 2005, 09:05:26 AM

i put a 2" body lift and 2" suspension lift and my 31's barley rub in the front - just had to trim back the fender liner and the plastic rocker cover