ZUKIWORLD Online | Suzuki 4x4 Editorial and Forum
ZUKIWORLD Discussion Forum => Suzuki 4x4 Forum => Topic started by: Zukipilot on September 22, 2005, 10:18:43 AM
-
My friend is working on a 92 Tracker and cant get it to run. He is getting fire and fuel to the motor but no injector pulse. Any ideas of what could be wrong?
Thanks Zig
-
I hate to say this but I think it's probly one of 2 places
- Poor connection or somehting hooked up wrong
- ECU
Typically no injector pulse from my experience is ECU
Best guess...
Zag
-
Cooll thatnks Zag, that was Mikes conclusion too. I will let Jimmy know.
Zig
-
Zig, also when the key is in the on pos there should be 12V on one side ov the inj. conn. If there isn't you have a powefeed prob. and check the feed ckt.
Kevin
-
. He is getting fire and fuel to the motor but no injector pulse.
Thanks Zig
you cant have one without the other.
-
had the same prob a couple of months ago on my nissan truck, took my mechanic 2 weeks to trouble shoot it cause everytime he would put the scanner on it it would fire up again(really messed with him)ended up being a corroded plug at the batt terminal that was the main power for the computer. had fuel press at the rail, had spark, would run when i would dump fuel into the air body.
look at those plugs, might be the problem
jason
-
I had the same problem with my X when I did the swap,
I was getting fuel, fire, ignition, compression, detonation but no combustion?.....
Wait, that was a bad dream... nvm
-Steve
:)